1. Hogar
  3. Resin profile of Photon Mono M5s Pro

Resin profile of Photon Mono M5s Pro

NOTE:

1. If the printing environment is lower than 68°F/20°C, it is recommended to increase the exposure time by 30%, and reduce the Z Lift Speed by 30%.

2. The data comes from the Anycubic Laboratory and is for reference only.

3. Different printing parameters and post-processing processes will present different results. If you encounter problems during printing, feel free to contact our customer service for support.

4. The following processing reference parameters are suitable for the factory default energy state of the Resin 3D printer. If the light energy is adjusted, the reference processing parameters need to be adjusted accordingly.

5. If you still fail to print on the default parameters, Please contact our customer service for professional guidance.



Image
  • Standard Resin
  • ● High Precision & Fast Printing
  • ● Strong Adhesion & Easy to Detach
  • ● Stable Performance & Various Colors
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s

Image
  • DLP Craftsman Resin
  • ● Developed for DLP 3D Printer
  • ● Photosensitive resin + NanoCeramic
  • ● Fast Speed, Low Shrinkage
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
  • Tough Resin
  • ● High Toughness, Not Easy to Break
  • ● Good Tensile Strength and Elongation
  • ● High Precision, Low Shrinkage
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3s
Light-Off Time 0.5s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s

Image
  • Water-Wash Resin+
  • ● Water Washable & Slight Odor
  • ● Low Viscosity, Fast Printing
  • ● High Precision & Low Shrinkage
Parameter Value
Layer Thickness 0.05mm
Exposure Time 2.8s
Light-Off Time 0.5s
Bottom Exposure Time 25s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
  • Standard Resin+
  • ● Compatible with most LCD and DLP 3D Printers
  • ● Accuracy and Toughness Upgrades
  • ● Easy to wash & Light odor
Parameter Value
Layer Thickness /
Exposure Time /
Light-Off Time /
Bottom Exposure Time /
Bottom Layer /
Anti-Aliasing Level /
Z Lift Distance /
Z Lift Speed /
Z Retract Speed /

Image
  • High Clear Resin
  • ● Resist Yellowing
  • ● Tough and Resilient
  • ● Light Odor and Safe
Parameter Value
Layer Thickness 0.05mm
Exposure Time 4s
Light-Off Time 0.5s
Bottom Exposure Time 35s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
  • ABS-Like Resin V2
  • ● High Strength & High Toughness
  • ● High Precision with Minimal Shrinkage
  • ● Impact Resistance & High Compatibility
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 35s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s

Image
  • High Speed Resin
  • ● Print Up To 3X Faster
  • ● Sturdy & Strong, Ensure Model Details
  • ● Speedy & Stable, Clean At Ease
Parameter Value
Layer Thickness 0.1mm
Exposure Time 1.9s
Light-Off Time 0.5s
Bottom Exposure Time 10s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 3mm/s
Z Lift Speed 20mm/s
Z Retract Speed 20mm/s
Image
  • Standard Resin V2
  • ● High Strength & High Toughness
  • ● High Precision with Minimal Shrinkage
  • ● Impact Resistance & High Compatibility
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s

Image
  • Tough Resin Ultra
  • ● Strong lmpact Resistance
  • ● Flexible with Excellent Rebound
  • ● Fine Texture
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 1s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
  • Tough Resin 2.0
  • ● Exceptional Toughness & Resistant to Breakage
  • ● Strong Elongation & High Flexibility
  • ● High Precision, Minimal Shrinkage
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 1s
Bottom Exposure Time 30s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s

Image
  • ABS-Like Resin Pro
  • ● Easy to Bend & Harder to Break
  • ● High Precision & Wide Compatibility
  • ● Professional Applications with Ease
Parameter Value
Layer Thickness 0.05mm
Exposure Time 3.6s
Light-Off Time 0.5s
Bottom Exposure Time 35s
Bottom Layer 5
Anti-Aliasing Level 1
Z Lift Distance 8mm/s
Z Lift Speed 6mm/s
Z Retract Speed 6mm/s
Image
  • Plant-Based Resin+
  • ● High Precision & Fast Printing
  • ● Strong Adhesion & Easy to Detach
  • ● Stable Performance & Various Colors
Parameter Value
Layer Thickness /
Exposure Time /
Light-Off Time /
Bottom Exposure Time /
Bottom Layer /
Anti-Aliasing Level /
Z Lift Distance /
Z Lift Speed /
Z Retract Speed /